Skip to content

Restore, Don’t Replace

Court Resurfacing Repairs & Maintenance in Greensboro

Stop cracks from spreading and get a flat, playable surface back, without a full rebuild.

  • On-Site Evaluation
  • Written Estimate
  • Final Walkthrough
  • Greensboro & Surrounds
A person in blue gloves using a long-handled roller to paint a floor bright blue.

What Goes Wrong

Why rushed or cheap resurfacing fails fast

The failure mode is almost always the same: coating applied before the base problem is fixed.

Coating Over Cracks

Applying acrylic over unrepaired cracks seals nothing, base movement reopens the surface within one season.

Base-First Repair

Crack width is measured first; cracks indicating base movement get asphalt base repair before any coating is applied.

Ignored Drainage

Low spots left unaddressed keep pooling water after rain, which softens the base and accelerates coating failure.

Flatness & Slope Check

A surface flatness inspection identifies low spots so leveling compound corrects drainage before the finish coat goes down.

Single-Coat Finish

One coat of acrylic wears through quickly on a high-traffic court, leaving bare patches within a year or two.

Multi-Coat System

A multi-coat acrylic finish system is applied in successive passes to reach the specified coat count for the surface type.

DIY Patch Products

Consumer-grade crack fillers rarely bond to asphalt or concrete long-term and can lift under freeze-thaw cycling.

Correct Filler & Prep

Patching compound matched to the base material is applied after cleaning, so the repair bonds and stays flush through winter.

Common problems, answered

Scope of Work

What court resurfacing repairs cover

From a single cracked panel to a full recoat and restripe, the scope is set by what the inspection finds.

Surface Flatness Inspection

Measures crack width, adhesion, and low spots.

Wear & Adhesion Assessment

Checks whether existing coating can hold a new layer.

Concrete Slab Resurfacing

Patch and recoat concrete base courts.

Asphalt Base Repair

Fix base movement before any finish coat is applied.

Restore, Don’t Replace

Patch, resurface, or restripe: choosing the right repair scope for your court

A surface inspection identifies whether the base is sound before any coating is applied, coating over a failing base wastes money and fails quickly.

The process starts with a surface flatness inspection and drainage check. Greensboro’s humid summers and freeze-thaw winters accelerate coating breakdown and widen existing cracks. The inspection measures crack width, checks adhesion of the existing surface, and identifies any low spots causing pooling water, a common issue on HOA and park courts built over clay-heavy subsoil.

Crack filler and patching compound are applied once the base condition is confirmed as sound. Cracks wider than a surface-level split may indicate base movement, which requires asphalt base repair before any coating goes down. Applying a multi-coat acrylic finish system over an unrepaired base produces a surface that fails within one or two seasons.

Resurfacing and court line striping complete the scope. The acrylic coating is applied in multiple passes using a squeegee or roller technique, building up to the specified coat count for the surface type. Fresh court line striping paint is applied last, with line positions confirmed against the agreed sport layout before the final walkthrough.

Why Choose Us

Why choose Greensboro Sports Courts for court resurfacing?

Every job is scoped in writing after an on-site inspection, so the estimate reflects what the court actually needs.

Inspection Before Any Commitment

An on-site evaluation of the surface and drainage happens before a single line item is priced or booked.

Itemised Written Estimate

The written estimate lists base prep, patching, coating, and striping as separate line items, no lump-sum surprises.

Signed-Off Final Walkthrough

The job is not closed until you walk the finished court and confirm the work matches the agreed scope.

Backyard to HOA Scale

We cover private backyard courts, HOA facilities, school courts, and commercial property courts across the area.

Wide Service Area

Coverage spans Greensboro, Winston-Salem, High Point, Kernersville, Clemmons, and surrounding communities.

Aerial view of multiple illuminated tennis courts at night with bright floodlights.
Finished regulation tennis court with acrylic surface and crisp white line striping backyard

How It Works

From first call to finished court in three steps

  1. 01

    Request an Evaluation

    Tell us the site and the sport, and we schedule a site visit to inspect the surface, drainage, and base condition.

  2. 02

    Review Your Written Estimate

    You receive an itemised estimate covering crack repair, leveling, coating passes, and line striping before anything is scheduled.

  3. 03

    Sign Off the Finished Court

    Once the coating cures and lines are painted, a final walkthrough confirms the court matches the agreed scope exactly.

Pricing Estimates

Typical Court Resurfacing Repairs & Maintenance Prices

Job typeTypical cost
Crack repair$500-$2,500
Acrylic recoat$4,000-$9,000
Full resurfacing$8,000-$25,000
Commercial resurfacing$12,000-$35,000
These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.
See all prices

Common Questions

Questions about court resurfacing repairs

  • Do small cracks always mean I need full resurfacing?

    No, small, isolated cracks under about a quarter-inch wide are usually candidates for crack filler rather than full resurfacing. The deciding factor is whether the base beneath is still stable. If cracks are spreading in a pattern, widening seasonally, or accompanied by surface heaving, the base may be failing and resurfacing becomes the more cost-effective fix.

  • Can my worn court be fixed without replacing the whole surface?

    Yes, in many cases. Localized wear, faded color, and minor cracking can be addressed with targeted repairs and a fresh acrylic coating over the existing surface. Full replacement is only necessary when the base layer has shifted, drainage has failed, or damage covers the majority of the playing area.

  • How do I know if the damage is just cosmetic?

    Cosmetic damage is surface-only: fading, light scuffing, or hairline cracks that don’t move or widen over time. If you press along a crack and feel flex, see water pooling after rain, or notice the surface lifting at the edges, the damage has reached the base and is no longer cosmetic. An on-site evaluation is the reliable way to tell the difference.

  • Why is my court still slippery after it dries?

    Persistent slipperiness after drying usually means the acrylic surface coating has worn through its textured aggregate layer. Once that grit is gone, the underlying binder becomes smooth and slick. Recoating with a sand-filled acrylic system restores traction. Algae or mildew growth can cause the same symptom and requires cleaning before any coating is applied.

  • How much of the court needs repair before resurfacing makes more sense?

    When damaged or deteriorated areas cover roughly 30 percent or more of the total surface, full resurfacing typically costs less per square foot than patching each zone individually. Below that threshold, targeted repairs are usually the better value. The condition of the base matters as much as the area affected, widespread base failure tips the decision toward resurfacing at any percentage.

  • Will repairs fix cracks, low spots, and drainage problems too?

    Crack filling and low-spot leveling are standard repair tasks. Drainage problems are more involved, correcting them may require regrading the base or adding subsurface drainage before any surface work begins. A repair that skips the drainage cause will fail again, so the drainage issue has to be resolved first.

  • Can a patch repair hold up, or will it fail again soon?

    A properly prepared patch, with the damaged area cut back to stable edges, the base compacted, and a compatible filler applied, can hold for several years. Patches fail quickly when they are applied over a soft or moving base, or when the filler material does not match the existing surface system. Preparation quality determines longevity more than the patch material itself.

  • Is a handyman repair or DIY patch a bad idea for my court?

    For sports courts, yes, DIY patches almost always fail within one to two seasons. Court surfaces require specific acrylic or polyurethane systems applied at controlled thickness, and the base must be properly prepared first. A mismatched filler bonds poorly, traps moisture, and can make the underlying damage worse, turning a minor repair into a full resurfacing job.

More questions about Court Resurfacing Repairs & Maintenance?

Get an On-Site Court Evaluation

Tell us the site and the sport. We schedule a surface and drainage assessment, then put the full repair scope in writing before anything is booked.

Request an Evaluation